Experience the rare blend of premium 17-4 stainless steel, aggressive styling, and modern optics compatibility—all at a price where other slides cut corners. The ODEN stripped slide is designed for knowledgeable Glock builders who demand both quality and creative control.
Key Features & Benefits
Engineered for Custom Builds
- Genuine 17-4 Stainless Steel: Tops the category for toughness and corrosion resistance—trusted by leading premium brands, seldom found at this price point.
- CNC Precision, USA Made: Every slide is computer-machined for dimensional accuracy, smooth channels, and hassle-free assembly (with quality parts).
- Clear Cerakote Finish: Protects against corrosion while preserving the look of raw steel. [Note: Cerakote is durable but less so than DLC or nitride.]
- Aggressive Styling: Window cuts reduce weight (great for ported barrels); deep angle serrations front and rear for a positive grip—even with gloves or wet hands.
Modern Optic Compatibility
- RMR Optic Cut (with Cover Plate): Direct-mount for Trijicon RMR, Holosun 507C X2, and most true RMR-pattern red dots.
Cover plate included; buyer supplies correct optic screws (#6-32, not included—see FAQ). - Lowered Ejection Port: Enhances ejection reliability even in high-volume or ported-barrel builds.
- Sight Cuts: Standard Glock-pattern dovetails for front and rear sights—swap in your favorite set for co-witness or desired sight picture.
Compatible & Flexible
- Frame Fit: Built for Glock 17 Gen 1, 2, 3 (OEM and quality aftermarket including Polymer80). Minor hand-fitting is rarely needed but possible with non-OEM builds.
- Stripped by Design: You supply the barrel, channel liner, all internals, and sights—ideal for discerning builders, those who prefer specific QC, or want the ultimate in customization.
What You Get & What You Need
Included:
- ODEN Stripped Slide (all exterior machining complete, no internal parts)
- RMR optic cut, ready to accept RMR or Holosun 507C/407C
- Black RMR cover plate (installed)
- Clear Cerakote corrosion-resistant finish
Not Included:
- Barrel
- All internal parts (striker/firing pin assembly, extractor, channel liner, safety plunger, etc.)
- Sights
- Optic screws (buyer must match length/type to optic)
- Recoil spring/guide rod
Buyer Advisory
- Stripped Slide: This is not a complete/ready-to-fire slide! You will build it by adding your choice of components.
- Optics Mounting: Use only screws supplied with your optic or industry-standard #6-32 screws. Improper types/lengths may damage the slide.
- Tolerance Stacking: Mixing brands may result in tight fit or minor break-in; always test for smooth function during assembly.
- Skill Required: Assembly, proper torqueing of optic screws, and functional testing are your responsibility.
- For Defensive Use: We recommend extensive test-firing to ensure reliability after assembly, especially with aftermarket or non-OEM internals.
- Gunsmithing: Professional installation is recommended if you’re not experienced with Glock slide builds.
Technical Specifications
|
Attribute |
Description |
|
Compatibility |
Glock 17 Gen 1–3 frames (OEM/Polymer80/quality aftermarket) |
|
Material |
Certified, heat-treated 17-4 stainless steel billet |
|
Finish |
Clear Cerakote (protective, visually unique/raw-steel look) |
|
Optic Cut |
Trijicon RMR/Holosun 507C X2 cut, cover plate included, screws not included |
|
Serrations |
Front & rear, deep angled “Oden” cuts |
|
Windows |
Large side window cuts, ported-barrel compatible |
|
Ejection Port |
Lowered for improved function |
|
Sight Cuts |
Glock-pattern front/rear dovetails |
|
Weight |
~12.00 ounces (slide only, no internals/barrel) |
|
Manufacturing |
CNC machined in the USA |
Frequently Asked Questions
Q: Is this slide complete/turn-key?
A: No—this is a stripped slide. NO internals, barrel, sights, or channel liner are included or installed.
Q: Which screws do I need for an RMR or Holosun 507C?
A: Use #6-32 screws sized for your specific optic (typically included by optic manufacturer). Always verify screw length; improper installation may cause damage or malfunction.
Q: Does the RMR cut include recoil bosses/posts?
A: The optic cut is CNC’d to proper RMR dimensions; cover plate included. Boss/post specifications coming soon—please contact us for current details.
Q: Will this fit my Polymer80 frame?
A: Yes, this slide is compatible with most Polymer80 Glock 17-pattern frames. Some aftermarket lower parts may require minor fitting.
Q: Can I use a ported barrel?
A: Absolutely—the Oden’s window cuts are designed for use with standard or ported barrels.
Q: Will Glock or aftermarket parts fit?
A: Machined for drop-in fit with all genuine or spec Glock 17 Gen 1–3 internals and sights.
Q: Is a channel liner included or pre-installed?
A: No. Please install your own Glock 17 channel liner during assembly.
Q: How durable is Cerakote vs. Nitride/DLC?
A: Cerakote is highly corrosion-resistant and abrasion-tough; it may show holster wear sooner than nitride/DLC coatings, but protects very well for most range/carry use.
Q: What warranty do I get?
A: Limited warranty against material and manufacturing defects. Cosmetic wear or damage due to improper installation is not covered.
Q: Is it really made in the USA?
A: Yes! From raw billet to finishing, every step is done in the USA.
See the ODEN Stripped Slide
(Feature close-up, high-res photos: window cuts, serration detail, optic cut with cover plate, raw Cerakote sheen. Optional: Fitment shots on Glock 17 frame and Polymer80.)
Why ODEN? Compare to Others
|
ODEN (Desert Cat USA) |
Brownells |
ZEV |
AimSurplus |
Norsso |
|
|
Material |
17-4 Stainless |
416/17-4 |
17-4 |
416/8620 |
17-4 |
|
Optic Cut |
RMR (w/plate) |
Varies |
RMR |
Sometimes |
RMR |
|
Finish |
Cerakote (Raw/Other) |
Nitride/Cerakote |
Black DLC |
Nitride |
DLC/Cerakote |
|
USA Made |
Yes |
Yes |
Yes |
Some import |
Yes |
|
Price |
$175.99 |
$190+ |
$299+ |
$140+ |
$299+ |
|
Warranty |
Limited |
Limited |
Limited |
Limited |
Limited |
Ready to Build Your Perfect Glock 17?
- Premium 17-4 stainless, CNC machined in the USA
- Aggressively styled; truly custom foundation
- RMR-ready and ported-barrel compatible
- Ships fast, warranty against defects, support from real people
WARRANTY/RETURNS
ONE (1) YEAR LIMITED WARRANTY
Desert Cat products and components are sold as-is. Desert Cat maintains confidence in the level of quality, design, and expert workmanship incorporated into every Desert Cat product and component. Therefore, Desert Cat extends a limited warranty against manufacturer and design defects, for a period of one (1) year from the date of purchase (90 days for commercial and/or governmental agencies), and Thirty (30) day satisfaction guarantee which gives the customer the option of returning their product without explanation within thirty (30) days from the date of purchase, only to the original retail purchaser with proof of purchase, returned prepaid with a sales receipt, and a return verification number (RMA) obtained from our support team.
No other warranties are implied or expressed in any way. No modifications to Desert Cat products in any manner, other than those expressed or implied by Desert Cat in written form, or the firing of hand-loaded, reloaded, remanufactured, or improper ammunition, instantly voids stated warranty. In the event of a warranty claim by the purchaser, the product or component must be inspected by Desert Cat to determine the validity of the claim prior to honoring this warranty. No other entity shall be qualified or validated by Desert Cat to determine a defect, for warranty purposes, of any product or component designed, created, or manufactured by Desert Cat. Purchaser accepts responsibility for any shipping and handling charges which may be incurred.
MODIFICATION OF TERMS & CONDITIONS
Desert Cat reserves the right to change the terms, conditions, and notices under which their products are represented at any time without notice.
WARRANTY RETURN PROCESSING
All warranties should be shipped to the manufacturer at the following address after obtaining an RMA:
Desert Cat
2031 Holly Ave
Lake Havasu City, AZ 86403
Please note, you must obtain an RMA before returning your product. Please contact Desert Cat at sales@desertcatusa.com to obtain your RMA.
PLEASE DO NOT RETURN YOUR PRODUCT(S) WITHOUT PRIOR AUTHORIZATION.
- Caliber:
- 9mm
- Overall Length:
- 6.8"
- Overall Width:
- 1.005"
- Height:
- .845"
- Weight:
- 12 oz
- Material:
- 17-4PH Stainless Steel Construction
- Optic Cut:
- Accepts Trijicon RMR & Holosun Red Dot Sights or sights with compatible mounting footprints
- RMR Cover Plate & Mounting Hardware:
- Cover Pate (1 ea.) and #6-32 x 3/16" (2 ea.) proprietary low profile screws (runs flush with Plate Cover surface).
- Compatibility:
- Glock 17 Gen 1-3
- Finish:
- Cerakote
- Country of Origin:
- 100% Manufactured /Machined / Produced in America
- Manufacturer:
- Desert Cat
- Designer:
- Desert Cat
1 Review Hide Reviews Show Reviews
-
Glock 17 Custom stripped upper
One of two excellent purchases from this business! Again, excellent fit and finish, excellent products, and fast shipping! Will be making another purchase! Thanks!